ADTRAN AOS Version R10.1.0 Command Reference Manual page 819

Command Reference Guide
show voice system-mode
Use the show voice system-mode command to display the current system mode running on the unit.
Specifying a day will display any transitions configured for that day. Variations of this command include:
show voice system-mode
show voice system-mode sunday
show voice system-mode monday
show voice system-mode tuesday
show voice system-mode wednesday
show voice system-mode thursday
show voice system-mode friday
show voice system-mode saturday
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
[sunday - saturday]
Default Values
No default values are valid for this command.
Command History
Release A1
Usage Examples
The following example shows sample output from the show voice system-mode monday command:
>enable
#show voice system-mode monday
Current system-mode: default
System-mode transition - Day: monday
Mode @ time: lunch @ 12:00
Mode @ time: default @ 13:00
Mode @ time: night @ 17:00
60000CRG0-35E
Optional. Displays the specified system mode programmed in the unit.
Choose from Sunday through Saturday.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
819