Command Reference Guide
debug efm config
Use the debug efm config command to enable debug messaging for all Ethernet in the first mile (EFM)
components configured on the unit. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release A4.05
Usage Examples
The following example enables debug messaging for all EFM components:
>enable
#debug efm config
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
247