ADTRAN AOS Version R10.1.0 Command Reference Manual page 907

Command Reference Guide
clock
The clock auto-correct-DST command allows the unit to automatically correct for daylight savings time
(DST). Use the clock no-auto-correct-DST command to disable this feature. Variations of this command
include:
clock auto-correct-DST
clock no-auto-correct-DST
Syntax Description
auto-correct-DST
no-auto-correct-DST
Default Values
By default, DST correction takes place automatically.
Command History
Release 6.1
Release 11.1
Functional Notes
Depending on the clock timezone chosen (refer to
information), one-hour DST correction may be enabled automatically. You may override this default using
this command.
Usage Examples
The following example allows for automatic DST correction:
(config)#clock auto-correct-DST
The following example overrides the one-hour offset for DST:
(config)#clock no-auto-correct-DST
60000CRG0-35E
Configures the unit to automatically correct for DST.
Disables DST correction.
Command was introduced.
Command was added to the Global command set.
clock timezone <value> on page 909
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
for more
907