ADTRAN AOS Version R10.1.0 Command Reference Manual page 1036

Command Reference Guide
ip igmp snooping vlan <vlan id>
Use the ip igmp snooping vlan command to enable Internet Group Management Protocol (IGMP)
snooping on the specified virtual local area network (VLAN). Use the no form of this command to disable
VLAN IGMP snooping.
Global IGMP snooping overrides the VLAN IGMP snooping. If global snooping is
disabled, you cannot enable VLAN IGMP snooping. If global snooping is enabled, you can
enable or disable VLAN IGMP snooping. Refer to
information.
Syntax Description
<vlan id>
Default Values
By default, VLAN IGMP snooping is enabled.
Command History
Release 12.1
Usage Examples
The following example enables IGMP snooping on VLAN 1:
(config)#ip igmp snooping vlan 1
60000CRG0-35E
Specifies a valid VLAN interface ID. Range is 1 to 4095.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip igmp snooping on page 1035 for more
1036