ADTRAN AOS Version R10.1.0 Command Reference Manual page 866

Command Reference Guide
aaa authentication banner <banner>
Use the aaa authentication banner command to specify the banner shown during authentication,
authorization, and accounting (AAA) login/authentication. Using the no form of this command returns the
banner to the default message.
Syntax Description
banner <banner>
Default Values
By default, the authentication banner is User Access Verification.
Command History
Release 5.1
Usage Examples
The following example changes the authentication banner to read User Login Authentication:
(config)#aaa authentication banner #
Enter TEXT message. End with the character '#'.
User Login Authentication:#
(config)#
60000CRG0-35E
Sets the banner shown before user authentication is attempted. The banner
can be multiple lines. Enter a delimiter (such as #) to begin recording the
typed text message used for the banner. The message must end with the
same delimiter to indicate that the message is complete. The text delimiters
are not displayed to the screen during operation.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
866