ADTRAN AOS Version R10.1.0 Command Reference Manual page 897

Command Reference Guide
auto-link server <hostname | ip address>
Use the auto-link server command to specify the contact information for the n-Command
service provider (MSP) server used by the AOS client. Use the no form of this command to remove the
server from the client configuration.
Syntax Description
<hostname | ip address>
Default Values
By default, no server is configured.
Command History
Release 17.3/A1
Usage Examples
The following example specifies the AOS client will communicate with the n-Command MSP server at IP
address 10.10.10.10:
(config)#auto-link server 10.10.10.10
60000CRG0-35E
Specifies the server host name or IP address. IP addresses should be
expressed in the decimal dotted notation (for example 10.10.10.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
managed
®
897