ADTRAN AOS Version R10.1.0 Command Reference Manual page 912

Command Reference Guide
community-list <name>
Use the community-list command to create a community list for Border Gateway Protocol (BGP) route
map use. Use the no form of this command to delete a community list.
Syntax Description
<name>
Default Values
By default, this command is disabled.
Command History
Release 9.3
Usage Examples
The following example creates a community list MyList and enters the Community List Configuration
mode:
(config)#community-list MyList
(config-comm-list)#
60000CRG0-35E
Specifies the name of the community to use in the community list attribute
for BGP routes. Refer to
more information on the available options.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Community List Command Set on page 2935 for
912