Command Reference Guide
show crypto ike
Use the show crypto ike command to display information regarding the Internet key exchange (IKE)
configuration. Variations of this command include the following:
show crypto ike client configuration pool
show crypto ike client configuration pool <name>
show crypto ike policy
show crypto ike policy <value>
show crypto ike remote-id <remote-id>
show crypto ike sa
show crypto ike sa brief
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the
Enable Mode Command Set on page
Syntax Description
client configuration pool
<name>
policy
<value>
remote-id <remote-id>
sa
sa brief
Default Values
No default values are necessary for this command.
60000CRG0-35E
Displays the list of all configured IKE client configuration pools.
Optional. Displays detailed information regarding the specified IKE client
configuration pool.
Displays information on all IKE policies. Indicates if client configuration is
enabled for the IKE policies and displays the pool names.
Optional. Displays detailed information on the specified IKE policy. This
number is assigned using the crypto ike policy command. Refer to
ike on page 920
for more information.
Displays information on all IKE information regarding the remote-id. The
remote-id value is specified using the crypto ike remote-id command.
Refer to
crypto ike remote-id on page 924
Displays all Internet Protocol security (IPsec) security associations (SAs).
Optional. Displays a brief listing of IPsec SAs.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
for more information.
crypto
456
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers