ADTRAN AOS Version R10.1.0 Command Reference Manual page 188

Command Reference Guide
copy cflash
Use the copy cflash command to copy files located on the CompactFlash
destination.
Variations of this command (valid only on AOS units WITH CompactFlash) include:
copy cflash <source file> boot
copy cflash <source file> cflash <new file>
copy cflash <source file> http <url> port <port>
copy cflash <source file> https <url> port <port>
copy cflash <source file> flash
copy cflash <source file> flash <new file>
copy cflash <source file> interface <interface>
copy cflash <source file> startup-config
copy cflash tftp
copy cflash xmodem
Syntax Description
<new file>
<source file>
boot
cflash <new file>
flash <new file>
http <url>
https <url>
interface <interface>
port <port>
startup-config
60000CRG0-35E
Specifies the name of the file (located on the CompactFlash card) to copy.
Specifies the name of the file (located on the CompactFlash card) to copy.
Copies the specified source file and overwrites the boot read only memory
(ROM).
Copies the specified source file and saves it to the CompactFlash card
using the specified new file name.
Copies the specified source file and saves it to flash memory using the
specified file name.
Copies the specified source file and transfers it to a Hypertext Transfer
Protocol (HTTP) server using the specified HTTP server uniform resource
locator (URL). Use HTTP PUT operation.
Copies the specified source file and transfers it to a secure socket
Hypertext Transfer Protocol Secure (HTTPS) server using the specified
HTTPS server URL. Use HTTPS PUT operation.
Updates the specified interface using a copy of the specified file. Specify an
interface in the format <interface type [slot/port | slot/port.subinterface id |
interface id | interface id.subinterface id | ap | ap/radio | ap/radio.vap]>. For
example, for a T1 interface, use t1 0/1; for an Ethernet subinterface, use
eth 0/1.1; for a PPP interface, use ppp 1; for an ATM subinterface, use
atm 1.1; and for a wireless virtual access point, use dot11ap 1/1.1. Type
copy cflash <source file> interface ? to display a list of valid interfaces.
Optional. Specifies the port used to transfer the specified file to an HTTP or
HTTPS server. Range is 0 to 65335.
Replaces the startup configuration with the specified file copied from the
CompactFlash card.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
®
card to the specified
188