ADTRAN AOS Version R10.1.0 Command Reference Manual page 485

Command Reference Guide
Usage Examples
The following is sample output from the show ethernet cfm association command:
>enable
#show ethernet cfm association
--------------------------------------------------------------------------------------------------------------------------------
Index Domain/Association
Component VID
--------------------------------------------------------------------------------------------------------------------------------
1 Bogus/Test
1 BenchTest/BenchAssoc
giga-eth
The following is sample output from the show ethernet cfm association detail command:
>enable
#show ethernet cfm association detail
Domain Name: Bogus
Assoc Name: Test
SNMP Index: 1
CCM Interval: 1sec
Components:
MEP Count: 0
Domain Name: BenchTest
Assoc Name: BenchAssoc
SNMP Index: 1
CCM Interval: 1min
Components:
giga-eth 0/2 (VLAN=0, ID=none)
MEP Count: 3
1 (remote)
2 (remote)
3 (local)
60000CRG0-35E
Sender-ID
0/2 0 none
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
CCM MEP-Cnt
1sec 0
1min 3
485