ADTRAN AOS Version R10.1.0 Command Reference Manual page 932

Command Reference Guide Global Configuration Mode Command Set
desktop-auditing dhcp
Use the desktop-auditing dhcp command to enable desktop auditing. Using the no form of this command
disables desktop auditing.
Syntax Description
No subcommands.
Default Values
By default, desktop auditing is disabled.
Command History
Release 17.8 Command was introduced.
Functional Notes
Desktop auditing is an AOS feature that collects network access protection (NAP) information through
NAP messages sent in Dynamic Host Configuration Protocol (DHCP) messages between clients
connected to the network and the network server.
Desktop auditing is configured by enabling the feature (using the desktop-auditing dhcp command) and
by configuring filters to limit the output of the collected NAP information. Information is limited by specifying
local desktop auditing policies. The configuration of these policies is outlined in Desktop Auditing Local
Policy Command Set on page 3037. For more information about desktop auditing, refer to the Configuring
Desktop Auditing in AOS configuration guide available online at https://supportforums.adtran.com.
Usage Examples
The following example enables the desktop auditing feature:
(config)#desktop-auditing dhcp
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 932