ADTRAN AOS Version R10.1.0 Command Reference Manual page 1093

Command Reference Guide
ip rtp quality-monitoring snmp trap
Use the ip rtp quality-monitoring snmp trap command to configure the Simple Network Management
Protocol (SNMP) trap parameters of voice quality monitoring (VQM). Using the no form of this command
disables VQM SNMP trap reports and collections. Variations of this command include:
ip rtp quality-monitoring snmp trap
ip rtp quality-monitoring snmp trap priority-level error
ip rtp quality-monitoring snmp trap priority-level info
ip rtp quality-monitoring snmp trap priority-level notice
ip rtp quality-monitoring snmp trap priority-level warning
Syntax Description
priority-level
error
info
notice
warning
Default Values
By default, SNMP traps are not enabled for VQM.
Command History
Release 17.6
Usage Examples
The following example enables SNMP traps for VQM:
(config)#ip rtp quality-monitoring snmp trap
60000CRG0-35E
Optional. Specifies the priority level of the SNMP trap created by VQM.
Specifies that an SNMP trap is created when VQM detects an error event.
Specifies that an SNMP trap is created when VQM detects an info event.
Specifies that an SNMP trap is created when VQM detects a notice event.
Specifies that an SNMP trap is created when VQM detects a warning.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1093