Show Radius Statistics - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show radius statistics

Use the show radius statistics command to display various statistics from the remote authentication
dial-in user service (RADIUS) subsystem. These statistics include number of packets sent, number of
invalid responses, number of timeouts, average packet delay, and maximum packet delay. Statistics are
shown for both authentication and accounting packets.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Release 17.1
Usage Examples
The following is sample output from the show radius statistics command:
>enable
#show radius statistics
Number of packets sent:
Number of invalid responses:
Number of timeouts:
Average delay:
Maximum delay:
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Auth. Acct.
3 0
0 0
0 0
2 ms 0 ms
3 ms 0 ms
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
716