ADTRAN AOS Version R10.1.0 Command Reference Manual page 214

Command Reference Guide
usbdrive0
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 17.7
Release 18.2
Usage Examples
The following example replaces the current running configuration file with newconfig.txt from the TFTP
server (10.200.2.4):
#copy tftp running-config
Address of remote host? 10.200.2.4
Source filename? newconfig.txt
Initiating TFTP transfer...
Received 4562 bytes.
Transfer Complete!
#
The following example copies the file myfile.biz from the TFTP server (10.200.2.4) and saves it
CompactFlash memory (naming the copy newfile.biz):
#copy tftp cflash
Address of remote host? 10.200.2.4
Source filename? myfile.biz
Destination filename? newfile.biz
Initiating TFTP transfer...
Received 45647 bytes.
Transfer Complete!
#
60000CRG0-35E
Copies a file from the TFTP server to the USB flash drive memory.
Command was introduced.
Command was expanded to include the ramdisk parameter.
Command was expanded to include USB flash drive memory.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
214