ADTRAN AOS Version R10.1.0 Command Reference Manual page 1102

Command Reference Guide
ip sdp grammar hold
Use the ip sdp grammar hold command to specify how to format hold messages in Session Description
Protocol (SDP) announcements. Use the no form of this command to return to the default value. Variations
of this command include the following:
ip sdp grammar hold rfc2543
ip sdp grammar hold rfc3264
Syntax Description
rfc2543
rfc3264
Default Values
By default, RFC 2543 is used for formatting hold messages.
Command History
Release 12.1
Usage Examples
The following example specifies to use RFC 3264 to format hold messages:
(config)#ip sdp grammar hold rfc3264
60000CRG0-35E
Specifies the use of RFC 2543 for formatting hold messages.
Specifies the use of RFC 3264 for formatting hold messages.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1102