ADTRAN AOS Version R10.1.0 Command Reference Manual page 793

Command Reference Guide
show voice directory
Use the show voice directory command to display direct inward dialing (DID) information. Variations of
this command include:
show voice directory
show voice directory <name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 14.1
Release 17.1
Usage Examples
The following example displays all extensions sorted by extension number:
>enable
#show voice directory
Directory Name: SYSTEM
User Name External
------------------------------------------------------
John Smith
Jane Doe
Directory Name: Engineering
User Name External
--------------------------------------------------------
John Doe Yes
60000CRG0-35E
Optional. Specifies the name on the directory to display. Only extensions
included in the specified directory will appear.
Command was introduced.
Command was expanded.
Command was expanded to include the modifiers begin, exclude, and
include.
Extension
5006
5005
Extension
5551212
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
793