ADTRAN AOS Version R10.1.0 Command Reference Manual page 228

Command Reference Guide
Command History
Release 8.1
Release 18.3
Release R10.1.0
Functional Notes
If no arguments are given, the debug bgp command displays general BGP events, such as sent/received
message summaries, route processing actions, and results. Keepalive packets are not debugged with this
command.
Usage Examples
The following example enables debug messages on general outbound BGP messages and events:
>enable
#debug bgp out
07:42:39: BGP OUT 10.15.240.1[2]: Transmitting msg, type=UPDATE (2), len=142
60000CRG0-35E
Command was introduced.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products. In addition, the scan, database,
route-table, and soft-reset parameters were added.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
228