ADTRAN AOS Version R10.1.0 Command Reference Manual page 810

Command Reference Guide
show voice queue
Use the show voice queue command to display the status of the call queuing feature. Variations of this
command include:
show voice queue
show voice queue <extension>
show voice queue detail
show voice queue detail <extension>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page 83.
Syntax Description
<extension>
detail
Default Values
No default values are necessary for this command.
Command History
Release A4.01
Usage Examples
The following example displays status information for the call queue at extension 6407:
>enable
#show voice queue 6407
Call Queue: 6407
Name: TSqueue
Description: Tech Support Call Queue
Max allowed number of queued calls: 16
Operation: active
State: unlocked
Current queue stats:
Calls: 1
Longest Wait: 30
60000CRG0-35E
Optional. Specifies the extension of the call queue to display.
Optional. Displays detailed call queue information.
Command was introduced.
Call distribution type: ring-all
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
810