ADTRAN AOS Version R10.1.0 Command Reference Manual page 1018

Command Reference Guide
ip firewall stealth
Use the ip firewall stealth command to disable Internet Protocol version 4 (IPv4) Transmission Control
Protocol (TCP) reset for denied IPv4 firewall associations. The stealth setting allows the route to be
invisible as a route hop to associated devices. Use the no form of this command to disable this feature.
The AOS IPv4 firewall must be enabled (using the command
the stateful inspection firewall to be activated.
Syntax Description
No subcommands.
Default Values
By default, the stealth option is disabled.
Command History
Release 9.3
Usage Examples
The following example enables the stealth option for the IPv4 firewall:
(config)#ip firewall stealth
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip firewall on page 999) for
1018