Command Reference Guide
debug mef config
Use the debug mef config command to enable debug messaging for all Metro Ethernet Forum (MEF)
components configured on the unit. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages. Variations of this command
include:
debug mef config
debug mef config detail
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
detail
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release A4.05
Usage Examples
The following example enables debug messages for all MEF component configurations:
>enable
#debug mef config
60000CRG0-35E
Optional. Specifies that detailed debug information is displayed.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
335