ADTRAN AOS Version R10.1.0 Command Reference Manual page 1029

Command Reference Guide
ip ftp access-class <name> in
Use the ip ftp access-class in command to assign an access policy to all self-bound File Transfer Protocol
(FTP) sessions. Use the no form of this command to disable this feature.
Syntax Description
<name>
Default Values
By default, all FTP access is allowed.
Command History
Release 2.1
Usage Examples
The following example applies the configured ACP (labeled Inbound_FTP) to inbound FTP traffic:
(config)#ip ftp access-class Inbound_FTP in
60000CRG0-35E
Specifies the configured access control policy (ACP) to apply to inbound
FTP traffic.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1029