ADTRAN AOS Version R10.1.0 Command Reference Manual page 434

Command Reference Guide
Release 17.1
Release 18.3
Release R10.1.0
Functional Notes
Information displayed includes the ID of this router and its autonomous system (AS) number, the
destination Network address of the route learned, the Next-Hop address to that network, the Metric, the
Local Preference (LocPrf) value (set using the command set local-preference * on ????), and the AS
Path to the destination network.
Usage Examples
In the following example, all IPv4 BGP routes are displayed whose community numbers match those
defined in the community list named CList1.
>enable
#show bgp ipv4 community-list CList1
BGP local router ID is 10.22.131.241, local AS is 302.
Status codes: * valid, > best, i - internal, o - local
Origin codes: i - IGP, e - EGP, ? - incomplete
NetworkNext HopMetric LocPrf Path
10.22.152.20/3010.22.131.10304302 300 1 3 4 i
10.22.152.24/2910.22.131.10304302 300 1 3 4 5 i
10.22.152.36/3010.22.131.10 304302 300 1 3 4 i
10.22.152.52/3010.22.131.10304302 300 1 3 4 i
11.0.0.0/3010.22.131.10304
12.0.0.0/30 10.22.131.10304
13.0.0.0/30 10.22.131.10304
14.0.0.0/3010.22.131.10304
20.0.0.0/30 10.22.131.10304
21.0.0.0/3010.22.131.10304
Total RIB entries = 10
60000CRG0-35E
Command was expanded to include the modifiers begin, exclude, and
include.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products. The command was also expanded to
include the any-vrf, ipv4, and vrf <name> parameters.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products. The command was also expanded to include
the ipv6 parameter.
302 300 1 3 4 6 i
302 300 1 3 4 6 i
302 300 1 3 4 6 i
302 300 1 3 4 6 i
302 300 1 3 4 5 i
302 300 1 3 4 5 i
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
434