ADTRAN AOS Version R10.1.0 Command Reference Manual page 1047

Command Reference Guide
ip mgcp local-domain-name
Use the ip mgcp local-domain-name command to specify the local Media Gateway Control Protocol
(MGCP) domain name. Use the no form of this command to remove the associated host name from the
AOS product. Variations of this command include:
ip mgcp local-domain-name <hostname | ipv4 address>
ip mgcp local-domain-name media-gateway
Syntax Description
<hostname | ipv4 address>
media-gateway
Default Values
By default, a local domain name is not configured.
Command History
Release A2
Usage Examples
The following example specifies that the local domain name for the media gateway is
mygateway@company.com:
(config)#ip mgcp local-domain-name mygateway@company.com
(config)#
60000CRG0-35E
Specifies the gateway host name in either a fully qualified domain name
(FQDN) format or as an IP version 4 (IPv4) address in dotted decimal
notation (XX.XX.XX.XX).
Specifies that the local domain name is based on the media gateway setting
on the physical interface used for outbound traffic (for example, the
Point-to-Point Protocol (PPP) or the Ethernet interfaces).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1047