ADTRAN AOS Version R10.1.0 Command Reference Manual page 743

Command Reference Guide
Command History
Release 12.1
Release 17.1
Release A5.01
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the command
Use the registrar to show the ip address of the registrar that each number is using on a SIP trunk.
Numbers on the same SIP trunk can use different registrars if sip-server validation is enabled (using the
command sip-server validation register on page
Usage Examples
The following is sample output from the show sip trunk-registration command:
>enable
#show sip trunk-registration
Ext Register Expire
---------------------------------------------------------------------------------------------------------------------------
4433 NO 0
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the registrar parameter
3598).
Grant Success Redirect Challenge Failed Timeout
0 0 0
Copyright © 2012 ADTRAN, Inc.
terminal length <number> on page
0 0
Enable Mode Command Set
837).
#
743