ADTRAN AOS Version R10.1.0 Command Reference Manual page 798

Command Reference Guide
show voice loopback calls
Use the show voice loopback calls command to display the status of the loopback call(s).
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release A1
Usage Examples
The following example displays all voice loopback calls:
>enable
#show voice loopback calls
ID Extension Codec Status
------------------------------------------------------------------------------------------------------------------------------------
1 1123
2 1123
3 1123
4 1123 G729
60000CRG0-35E
Command was introduced.
<ENDED (invalid number) -> 8837655
Calling
<ENDED (no appearances) <- 4001
Connected
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
Number Duration (hour:min:sec)
:01
-> 4001 :05
:01
-> 4001 :07
798