ADTRAN AOS Version R10.1.0 Command Reference Manual page 282

Command Reference Guide
debug ip flow
Use the debug ip flow command to display debug messages associated with integrated traffic monitoring
(ITM) operation. Use the no form of this command to disable the debug messages. Variations of this
command include:
debug ip flow cache entry
debug ip flow cache expiration
debug ip flow export
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
cache entry
cache expiration
export
Default Values
By default, debug messages in AOS are disabled.
Command History
Release 16.1
Usage Examples
The following example enables debug messages for the ip flow export command and gives sample
output:
#debug ip flow export
#show run
ip flow export destination 10.22.22.254 3000
ip flow export vrf BLUE destination 172.16.4.5 65774
*Dec 18 22:45:43: IPFLOW: Sent export pkt #32958 to 10.22.22.254:3000
*Dec 18 22:45:43: IPFLOW: Sent export pkt #32958 to 172.16.4.5:65774 (BLUE)
60000CRG0-35E
Specifies a debug message will be generated every time traffic flow data is
added to the flow cache.
Specifies a debug message will be generated every time traffic flow data
expires from the flow cache.
Specifies a debug message will be generated every time a message is sent
to an external data collector.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
282