Table of Contents
Advertisement
Command Reference Guide
ip rtp quality-monitoring threshold out-of-order
Use the ip rtp quality-monitoring threshold out-of-order command to specify threshold values for
logging out-of-order packet events during voice quality monitoring (VQM). When more out-of-order
packets are detected in the Realtime Transport Protocol (RTP) stream than the specified event threshold,
an event message is generated. Use the no form of this command disables the event reporting for that
message type and threshold. Variations of this command include:
ip rtp quality-monitoring threshold out-of-order error
ip rtp quality-monitoring threshold out-of-order error <value>
ip rtp quality-monitoring threshold out-of-order info
ip rtp quality-monitoring threshold out-of-order info <value>
ip rtp quality-monitoring threshold out-of-order notice
ip rtp quality-monitoring threshold out-of-order notice <value>
ip rtp quality-monitoring threshold out-of-order warning
ip rtp quality-monitoring threshold out-of-order warning <value>
Syntax Description
error
info
notice
warning
<value>
Default Values
By default, the out-of-order packet thresholds are info 0, notice 25, warning 50, and error 100.
Command History
Release 17.1
Usage Examples
The following example enables VQM out-of-order packet info messages to be logged if the number of
out-of-order packets is greater than 5:
(config)#ip rtp quality-monitoring threshold out-of-order info 5
60000CRG0-35E
Specifies the threshold for out-of-order packet error messages to be logged.
Specifies the threshold for out-of-order packet information messages to be
logged.
Specifies the threshold for out-of-order packet notice messages to be
logged.
Specifies the threshold for out-of-order packet warning messages to be
logged.
Optional. The range is 0 to 30000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1097
Advertisement
Table of Contents
