Debug Ip Ospf - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

debug ip ospf

Use the debug ip ospf command to activate debug messages associated with open shortest path first
(OSPF) routing operations. Debug messages are displayed (real time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages. Variations of this command include:
debug ip ospf
debug ip ospf adj
debug ip ospf database-timer
debug ip ospf events
debug ip ospf flood
debug ip ospf hello
debug ip ospf lsa-generation
debug ip ospf packet
debug ip ospf retransmission
debug ip ospf spf
debug ip ospf tree
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
adj
database-timer
events
flood
hello
lsa-generation
packet
retransmission
spf
tree
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 3.1
60000CRG0-35E
Optional. Displays OSPF adjacency events.
Optional. Displays OSPF database timer.
Optional. Displays OSPF events.
Optional. Displays OSPF flooding.
Optional. Displays OSPF hello events.
Optional. Displays OSPF link state advertisement (LSA) generation.
Optional. Displays OSPF packets.
Optional. Displays OSPF retransmission events.
Optional. Displays OSPF shortest path first (SPF) calculations.
Optional. Displays OSPF database tree.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
292