Show Bridge - ADTRAN AOS Version R10.1.0 Command Reference Manual

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide

show bridge

Use the show bridge command to display a list of all configured bridge groups (including individual
members of each group). Enter an interface or a bridge number to display the corresponding list. Variations
of this command include:
show bridge
show bridge <interface>
show bridge <number>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the
Enable Mode Command Set on page
Syntax Description
<interface>
<number>
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 9.1
Release 17.1
Release A4.01
60000CRG0-35E
Optional. Displays all bridge groups associated with the specific interface.
Specify an interface in the format <interface type [slot/port |
slot/port.subinterface id | interface id | interface id.subinterface id | ap |
ap/radio | ap/radio.vap]>. For example, for a T1 interface, use t1 0/1; for an
Ethernet subinterface, use eth 0/1.1; for a PPP interface, use ppp 1; for an
ATM subinterface, use atm 1.1; and for a wireless virtual access point, use
dot11ap 1/1.1. Type the show bridge ? command to display a list of
applicable interfaces.
Optional. Displays a specific bridge group.
Command was introduced.
Command was expanded to include the high level data link control (HDLC)
interface.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
441

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents