ADTRAN AOS Version R10.1.0 Command Reference Manual page 492

Command Reference Guide
By default, all remote MEPs are displayed.
Command History
Release 17.4
Release A4.01
Release A5.01
Functional Notes
For more information regarding Ethernet OAM CFM and its operation on AOS products, refer to the
Ethernet OAM CFM in AOS configuration guide available online at
(article number 3013).
Usage Examples
The following is sample output from the show ethernet cfm mep remote command:
>enable
#show ethernet cfm mep remote
Local MEP 3
Domain/Assoc: BenchTest/BenchAssoc
Level: 5 VLAN: 0
Interface: giga-eth 0/2
Remote MEPs: (* = static)
ID State Age
--------------------------------------------------------------------------------------------------------------
* 1 Ok 165936
* 2 Ok 165936
60000CRG0-35E
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the Gigabit Ethernet interface.
MAC
00:A0:C8:1F:CE:B0
00:A0:C8:00:62:F2
Copyright © 2012 ADTRAN, Inc.
https://supportforums.adtran.com
RDI Port Iface
- No TLV Up
- No TLV Up
Enable Mode Command Set
492