ADTRAN AOS Version R10.1.0 Command Reference Manual page 449

Command Reference Guide
show clock
Use the show clock command to display the system time and date entered using the clock set command.
Refer to clock set <time> <day> <month> <year> on page 181
command include:
show clock
show clock detail
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
detail
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 17.1
Usage Examples
The following example displays the current time and data from the system clock:
>enable
#show clock
23:35:07 UTC Tue Aug 20 2002
60000CRG0-35E
Optional. Displays more detailed clock information, including the time source.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
for more information. Variations of this
83.
449