ADTRAN AOS Version R10.1.0 Command Reference Manual page 1103

Command Reference Guide
ip sdp grammar ptime
Use the ip sdp grammar ptime command to specify which packet times to send in Session Description
Protocol (SDP) announcements. Use the no form of this command to return to the default value. Variations
of this command include the following:
ip sdp grammar ptime explicit
ip sdp grammar ptime implicit
Syntax Description
explicit
implicit
Default Values
By default, implicit packet times are sent.
Command History
Release A4.01
Usage Examples
The following example specifies sending explicit packet times:
(config)#ip sdp grammar ptime explicit
60000CRG0-35E
Specifies sending all packet times.
Specifies sending only packet times of 10 and 30 ms.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1103