ADTRAN AOS Version R10.1.0 Command Reference Manual page 666

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
show mac address-table multicast
Use the show mac address-table multicast command to display all multicast medium access control
(MAC) addresses known by AOS. Variations of this command include the following:
show mac address-table multicast
show mac address-table multicast count
show mac address-table multicast igmp-snooping
show mac address-table multicast igmp-snooping count
show mac address-table multicast user
show mac address-table multicast user count
show mac address-table multicast vlan <vlan id>
show mac address-table multicast vlan <vlan id> count
show mac address-table multicast vlan <vlan id> igmp-snooping
show mac address-table multicast vlan <vlan id> igmp-snooping count
show mac address-table multicast vlan <vlan id> user
show mac address-table multicast vlan <vlan id> user count
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the
Enable Mode Command Set on page
Syntax Description
count
igmp-snooping
user
vlan <vlan id>
Default Values
No default values are necessary for this command.
Command History
Release 14.1
Release 17.1
60000CRG0-35E
Optional. Displays the multicast address count.
Optional. Displays MAC addresses learned via Internet Group Management
Protocol (IGMP) snooping.
Optional. Displays static MAC addresses entered by the user.
Optional. Displays address table information related to a specific virtual
local area network (VLAN). Valid range is 1 to 4094.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
666

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents