ADTRAN AOS Version R10.1.0 Command Reference Manual page 1090

Command Reference Guide
ip rtp quality-monitoring reporter <name>
Use the ip rtp quality-monitoring reporter command to create and name a voice quality monitoring
(VQM) reporter. Use the no form of this command to delete the reporter.
Syntax Description
<name>
Default Values
By default, no VQM reporter exists.
Command History
Release 17.6
Functional Notes
The ip rtp quality-monitoring reporter command creates a VQM reporter and also enters the reporter's
configuration mode. For more information on configuring VQM reporters, refer to the
Command Set on page
Usage Examples
The following example creates the VQM reporter Reporter1 and enters the reporter's configuration mode:
(config)#ip rtp quality-monitoring reporter Reporter1
Configuring New Reporter "Reporter1"
(config-rtp-reporter-Reporter1)#
60000CRG0-35E
Specifies the name of the VQM reporter.
Command was introduced.
3885.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
VQM Reporter
1090