ADTRAN AOS Version R10.1.0 Command Reference Manual page 700

Command Reference Guide
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the terminal length command; refer to
page 837).
Usage Examples
The following example displays power information for all PoE interfaces:
>enable
#show power inline
Interface Admin
eth 0/1 auto
eth 0/2 auto
--MORE--
60000CRG0-35E
Oper Power (watts)
off n/a
off n/a
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
terminal length <number> on
Class
n/a
n/a
700