ADTRAN AOS Version R10.1.0 Command Reference Manual page 334

Command Reference Guide
debug mail-client
Use the debug mail-client command to enable mail agent debug messages. Variations of this command
include:
debug mail-client
debug mail-client <agent name>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<agent name>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.2
Usage Examples
The following example enables debug messaging for all configured mail agents:
>enable
#debug mail-client
60000CRG0-35E
Optional. Specifies debug messages are enabled only for the specified mail
agent.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
334