ADTRAN AOS Version R10.1.0 Command Reference Manual page 566

Command Reference Guide
Command History
Release 7.1
Release 9.1
Release 11.1
Release 17.1
Release A4.01
Release A5.01
Usage Examples
The following is sample output from the show ip mroute all command:
>enable
#show ip mroute all
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned, J - Join SPT, T - SPT-bit Set,
F - Register, R - RP-bit Set
Timers: Uptime/Expires
(*, 225.1.0.1), 01:17:34/00:03:25, RP 192.168.0.254, Flags: SC
Forwarding Entry: Yes
Incoming interface: tunnel 2, RPF nbr 172.16.2.10
Outgoing interface list:
eth 0/1, Forward, 01:17:34/00:03:25
60000CRG0-35E
Command was introduced.
Command was expanded to include the high level data link control (HDLC)
and tunnel interfaces.
The all parameter was added.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the Gigabit Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
566