ADTRAN AOS Version R10.1.0 Command Reference Manual page 528

Command Reference Guide
show interfaces adsl <slot/port>
Use the show interfaces adsl command to display information related to the asymmetric digital subscriber
line (ADSL) port. Variations of this command include:
show interfaces adsl <slot/port>
show interfaces adsl <slot/port> information
show interfaces adsl <slot/port> information atuc
show interfaces adsl <slot/port> information atur
show interfaces adsl <slot/port> information bit-allocation
show interfaces adsl <slot/port> performance-statistics
show interfaces adsl <slot/port> performance-statistics <x-y>
show interfaces adsl <slot/port> performance-statistics total-24-hour
show interfaces adsl <slot/port> performance-statistics total-previous-24-hour
show interfaces adsl <slot/port> version
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<slot/port>
information
atuc
atur
bit-allocation
performance-statistics
<x-y>
total-24-hour
total-previous-24-hour
version
Default Values
No default values are necessary for this command.
60000CRG0-35E
Specifies ADSL interface slot and port number.
Optional. Displays all ADSL interface information.
Optional. Displays only ADSL remote information.
Optional. Displays only ADSL local information.
Optional. Displays only ADSL DMT bit-allocation table.
Optional. Displays all 96 stored intervals.
Optional. Displays only a specified interval (x) or range of intervals (x-y).
Optional. Displays only the current 24-hour totals.
Optional. Displays only the previous 24-hour totals.
Optional. Displays current version information (e.g., model and list number,
software version, etc.) for the interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
528