ADTRAN AOS Version R10.1.0 Command Reference Manual page 454

Command Reference Guide
show crypto ca
Use the show crypto ca command to display information regarding certificates and profiles. Variations of
this command include:
show crypto ca certificates
show crypto ca crls
show crypto ca profiles
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
certificates
crls
profiles
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Release 17.1
60000CRG0-35E
Displays information on all certificates.
Displays a summary of all certificate revocation lists (CRLs) for each
certificate authority (CA).
Displays information on all configured CA profiles.
Command was introduced (enhanced software version only).
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
454