Show Bgp - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show bgp

Use the show bgp command to display details about Border Gateway Protocol (BGP) configuration on the
AOS device, including the specified route, advertising router IPv4 or IPv6 address, router ID, and the list
of neighbors to which this route is being advertised. Variations of this command include:
show bgp any-vrf ipv4
show bgp any-vrf ipv4 <ipv4 address>
show bgp any-vrf ipv4 <ipv4 address> <subnet mask>
show bgp any-vrf ipv4 summary
show bgp ipv4
show bgp ipv4 <ipv4 address>
show bgp ipv4 <ipv4 address> <subnet mask>
show bgp ipv4 summary
show bgp vrf <name> ipv4
show bgp vrf <name> ipv4 <ipv4 address>
show bgp vrf <name> ipv4 <ipv4 address> <subnet mask>
show bgp vrf <name> ipv4 summary
show bgp any-vrf ipv6
show bgp any-vrf ipv6 <ipv6 address/prefix-length>
show bgp any-vrf ipv6 summary
show bgp ipv6
show bgp ipv6 <ipv6 address/prefix-length>
show bgp ipv6 summary
show bgp vrf <name> ipv6
show bgp vrf <name> ipv6 <ipv6 address/prefix-length>
show bgp vrf <name> ipv6 summary
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
any-vrf
ipv4
ipv6
vrf <name>
<ipv4 address>
60000CRG0-35E
Optional. Displays BGP information for all VPN routing and forwarding
(VRF) instances.
Displays IPv4 BGP route information.
Displays IPv6 BGP route information.
Optional. Displays BGP information for a specific VRF instance.
Optional. Specifies a valid IPv4 address. IPv4 addresses should be
expressed in dotted decimal notation (for example, 10.10.10.1).
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
427