ADTRAN AOS Version R10.1.0 Command Reference Manual page 1048

Command Reference Guide
ip mgcp max1 <value>
Use the ip mgcp max1 command to specify the number of Media Gateway Control Protocol (MGCP)
message retransmissions between the gateway and the call agent. Use the no form of this command to
return to the default value.
Syntax Description
<value>
Default Values
By default, the max1 value is set to 5.
Command History
Release A2
Functional Notes
If the gateway does not receive a response from the call agent, the gateway retransmits MGCP messages
max1 times before the gateway either queries the domain naming system (DNS) to detect a possible
change in call agent interfaces or directs transmissions to alternate call agent IP addresses.
For more information about MGCP configuration, refer to the MGCP in AOS configuration guide available
online at https://supportforums.adtran.com
Usage Examples
The following example sets the number of message transmissions between the gateway and the call agent
to 20:
(config)#ip mgcp max1 20
60000CRG0-35E
Specifies the number of message retransmissions that will occur between
the gateway and the call agent while the gateway waits for a response from
the call agent. Range is 1 to 255.
Command was introduced.
(article number 2347).
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1048