ADTRAN AOS Version R10.1.0 Command Reference Manual page 824

Command Reference Guide
show voice users sip
Use the show voice users sip command to display a list of Session Initiation Protocol (SIP) users with
their associated ports.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 15.1
Release 17.1
Usage Examples
The following is sample output from the show voice users sip command:
>enable
#show voice users sip
First Last
-----------------------------------------------------------------------------------------------------------------------
Fronia Cobins
Gorge Owens
Heather Virginia
Total number of configured SIP voice users: 3
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Extension Interface MAC Address
4430 Unregistered user - Unable to resolve port
4440 Unregistered user - Unable to resolve port
4450 Unregistered user - Unable to resolve port
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
IP Address
824