Usage Examples - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
Functional Notes
The link state ID differs depending on whether the LSA in question describes a network or a router.
If describing a network, this ID is one of the following:
• The network's IP address. This is true for type 3 summary link advertisements and in autonomous
system external link advertisements.
• An address obtained from the link state ID. If the network link advertisement's link state ID is masked
with the network's subnet mask, this will yield the network's IP address.
If describing a router, this ID is always the router's OSPF router ID.

Usage Examples

The following example shows the database link state summary for all areas:
>enable
#show ip ospf database
60000CRG0-35E Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
570