ADTRAN AOS Version R10.1.0 Command Reference Manual page 946

Command Reference Guide Global Configuration Mode Command Set
ethernet cfm log-changes
Use the ethernet cfm log-changes command to enable Ethernet operations, administration, and
maintenance (OAM) connectivity fault management (CFM) warning messages on the AOS device.
Warning messages are generated when remote maintenance endpoint (MEP) defects are detected. The no
form of this command causes the warning messages to appear as debug messages.
Syntax Description
No subcommands.
Default Values
By default, warning messages are disabled.
Command History
Release 17.4 Command was introduced.
Functional Notes
For more information about Ethernet OAM CFM and its operation on AOS products, refer to the Ethernet
OAM CFM in AOS configuration guide available online at https://supportforums.adtran.com (article number
3013).
Usage Examples
The following example enables Ethernet OAM CFM warning messages:
(config)#ethernet cfm log-changes
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 946