ADTRAN AOS Version R10.1.0 Command Reference Manual page 812

Command Reference Guide
show voice ring-group
Use the show voice ring-group command to display all ring groups. Variations of this command include:
show voice ring-group
show voice ring-group <number>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 17.1
Usage Examples
The following example displays all ring groups:
>enable
#show voice ring-group
ring-group 1234
description:
Number of calls allowed: 1
First Last
------------------------------------------------------------------------
Order NumRings
------------------------------------------------------------------------
1 2
2 2
3 2
4 2
5 2
60000CRG0-35E
Optional. Displays information about a specific ring group extension.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
type: linear
Ext Logged In
Action
None
None
None
None
None
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
812