ADTRAN AOS Version R10.1.0 Command Reference Manual page 792

Command Reference Guide
show voice did
Use the show voice did command to display direct inward dialing (DID) information. Variations of this
command include:
show voice did
show voice did groups
show voice did other
show voice did users
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
groups
other
users
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 17.1
Usage Examples
The following example displays DID entries for ring groups:
>enable
#show voice did groups
60000CRG0-35E
Optional. Displays all DID entries for ring groups.
Optional. Displays all nonuser and nonring group DID entries.
Optional. Displays all DID entries for users.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
792