ADTRAN AOS Version R10.1.0 Command Reference Manual page 996

Command Reference Guide
ip ffe max-entries <value>
Use the ip ffe max-entries command to set the global maximum number of RapidRoute Engine entries
allowed. Use the no form of this command to return to the default value.
Issuing this command will cause all RapidRoute entries in the unit to be cleared.
Syntax Description
<value>
Default Values
By default, the ip ffe max-entries is set to 16384.
Command History
Release 13.1
Usage Examples
The following example sets the total maximum number of RapidRoute entries to 500:
(config)#ip ffe max-entries 500
60000CRG0-35E
Specifies the total number of RapidRoute entries for all interfaces. Valid
range is 1 to 32768.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
996