ADTRAN AOS Version R10.1.0 Command Reference Manual page 477

Command Reference Guide
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
mac-address <mac address>
managed
name <name>
status
available
download
init
no_session
ready
recovery
running
session
unmanaged
detail
realtime
Default Values
No default values are necessary for this command.
Command History
Release 15.1
Release 16.1
Release 17.1
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the terminal length command; refer to
page 837).
60000CRG0-35E
Optional. Displays a particular access point (AP) by medium access
control (MAC) address. MAC addresses should be expressed in the
following format xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Optional. Displays a list of APs managed by this AC.
Optional. Displays a particular AP by name.
Optional. Displays APs at a certain status. (Refer to the options below.)
Optional. Displays APs at available session state.
Optional. Displays APs at download state.
Optional. Displays APs at init state.
Optional. Displays APs at no session state.
Optional. Displays APs at ready state.
Optional. Displays APs at recovery state.
Optional. Displays APs at running state.
Optional. Displays APs at session state.
Optional. Displays a list of APs not managed by this AC.
Optional. Displays a detailed list of all discovered APs.
Optional. Displays full-screen output in real time. Refer to the
Functional Notes below for more information.
Command was introduced.
Command was expanded to include the available session state.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
terminal length <number> on
477