ADTRAN AOS Version R10.1.0 Command Reference Manual page 562

Command Reference Guide
Release A5.01
Usage Examples
The following is sample output of the show ip interfaces command, and displays information for IPv4
interfaces:
>enable
#show ip interfaces
eth 0/1 is UP, line protocol is UP
Ip address is 10.10.10.1
Netmask is 255.255.255.0
MTU is 1500
Fastcaching is Enabled
RIP Authentication is Disabled
RIP Tx uses global version value
60000CRG0-35E
Command was expanded to include the Gigabit Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
562