ADTRAN AOS Version R10.1.0 Command Reference Manual page 476

Command Reference Guide
show dot11 access-point
Use the show dot11 access-point command to display information about wireless access points (APs) for
the wireless access controllers (ACs) in the network. Variations of this command include the following:
show dot11 access-point
show dot11 access-point detail
show dot11 access-point mac-address <mac address>
show dot11 access-point mac-address <mac address> detail
show dot11 access-point managed
show dot11 access-point managed detail
show dot11 access-point managed realtime
show dot11 access-point name <name>
show dot11 access-point name <name> detail
show dot11 access-point realtime
show dot11 access-point status available
show dot11 access-point status available detail
show dot11 access-point status download
show dot11 access-point status download detail
show dot11 access-point status init
show dot11 access-point status init detail
show dot11 access-point status no_session
show dot11 access-point status no_session detail
show dot11 access-point status ready
show dot11 access-point status ready detail
show dot11 access-point status recovery
show dot11 access-point status recovery detail
show dot11 access-point status running
show dot11 access-point status running detail
show dot11 access-point status session
show dot11 access-point status session detail
show dot11 access-point unmanaged
show dot11 access-point unmanaged detail
show dot11 access-point unmanaged realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
60000CRG0-35E
83.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
476